Maintenance
Weekly:
- Check its operation.
- Check that the machine is level with the ground.
- Make sure that both the surface and the underside of the machine are clean.
- Use a soft nylon bristle brush to clean the grooves in the pedals.
- Clean the console with a damp cloth and dry it completely.
Monthly:
- Inspect visible welds, structure, and cable connections.
- Inspect and lubricate the lift motor screw if necessary.
- Remove the back covers and vacuum around the electronic board.
- Clean drive belts and pulleys.
- Check that the wheels run smoothly down the ramp.
- Clean ramps and wheels with an approved solution.
- Inspect the power cord and make sure it is in good condition.
Quarterly basis: *
- Check torque setting on bearing housings and connecting rod arm.
- Inspect for tension or excessive wear in the straps.
- Lubricate the lift motor screw with synthetic grease.
Semi-annually: **
- Check battery voltage.
- Perform software diagnosis, check LED function and record odometer reading.
- Perform a full functional check of all programs and settings.
- Visually inspect elevator and drive belts for damage, cracks, or excessive wear.
- Check the function of the speed sensor.
- Visually inspect all cables and connectors
- Perform heart rate functionality tests.
*Complete all monthly inspections plus the following.
**Complete all monthly and quarterly inspections plus the ones below.