Maintenance
Weekly:
- Check its operation.
- Check that the machine is level with the ground.
- Make sure that both the surface and the underside of the machine are clean.
- Clean the electronic console with a damp cloth and dry it completely.
Monthly:
- Inspect visible welds, structure, and wire connections.
- Remove the covers and vacuum on low power around the electronic board.
- Wipe the unit with a cloth.
- Check that the pedals move freely and smoothly.
- Inspect the power adapter and make sure the cable is in good condition.
- Verify that the handheld heart rate sensors cable is working properly.
Quarterly basis: *
- Inspect for excessive wear on the arms and fenders.
- Check drive belts for proper tension. If not, adjust them.
- Inspect the springs.
- Check that the pedal stops are in good conditions.
Semi-annually: **
- Visually inspect belts for damage, cracks, or excessive wear.
- Check battery voltage.
- Check that the pedal strap clamps are tightened to the proper torque.
- Perform software diagnosis, check LED function and record odometer reading.
- Perform cardiac function tests.
- Visually inspect the cables and connectors.
*Complete all monthly inspections plus the following.
**Complete all monthly and quarterly inspections plus the ones below.